Skip to the yard
Waxsealai

Anycubic Kobra X Drops to $299.99 With Built-In Multicolor Printing

Shipped
Shipper
Ben Stockton
Readers
588

The Kobra X is back at its Amazon low of $299.99, with built-in four-color printing, a 260 mm build volume and optional expansion to 19 colors.

Anycubic Kobra X Drops to $299.99 With Built-In Multicolor Printing

At $299.99, the Anycubic Kobra X combines a lower entry price with a feature that can change the workload for multicolor prints: its ACE Gen 2 filament system is built in. The Amazon price is 17% below the listed $359 price and matches the printer’s lowest price there. Access to the discount requires an active Amazon Prime membership.

The Kobra X is aimed at people starting with 3D printing as well as experienced users who want another machine for color work. Its key distinction is that color changes can happen during a print through the integrated system, instead of requiring someone to pause the job and swap filament by hand. That can make complex models more practical to produce, though multicolor printing still involves planning the colors and managing the material used for each job.

In testing, a four-color print that required 776 color swaps finished 10 hours faster on the Kobra X than on the Bambu Lab A1. The two printers had otherwise similar printing speeds and a similar design, making the time difference a useful indicator of how the Kobra X’s material handling can affect a swap-heavy job. It doesn’t establish that every multicolor print will be faster: the benefit depends on the model, the number of changes and the chosen settings.

Kobra X Multicolor 3D Printer: was $359, now $299
Amazon low price
The Kobra X has a 260 x 260 x 260 mm (10.23 x 10.23 x 10.23 inch) build volume, automatic Z bed leveling and a color touch screen. View the deal.

More colors through add-on systems

The Kobra X supports up to four ACE Gen 2 systems, allowing prints that use as many as 19 different colors. That gives users room to expand beyond the built-in multicolor setup if their projects call for more materials. The 19-color figure describes the supported maximum; it doesn’t mean every model will use that many colors or that adding systems is necessary for ordinary prints.

For beginners, an integrated filament system can reduce the setup burden of getting a multicolor job underway. For more experienced makers, the option to connect additional systems may matter when producing models with many distinct colors. Either way, the practical advantage is most apparent on prints with frequent changes. A single-color object won’t make as much use of the Kobra X’s multicolor capability.

Setup, monitoring and material handling

The printer has a 260 mm cube build area, a direct drive extruder and a 49-point automatic bed-leveling system. The leveling process checks points across the bed to help account for its surface when preparing a print. An RFID reader can identify Anycubic filament, which may streamline material selection when using the company’s tagged spools. The described identification feature is specific to Anycubic filaments.

Users can manage the printer through its touch screen over USB, a network connection, an app or a cloud service. A built-in 720p camera supports live monitoring, while alerts can flag potential print problems. The machine also includes AI-based detection for foreign objects and “spaghetti” failures, where extruded filament ends up loose rather than forming the intended part. These tools can help users spot trouble, but they don’t remove the need to check prints and respond when a job goes wrong.

The review found the Kobra X fairly quiet in operation, with little filament retraction required, and reported successful prints across a range of materials. Those observations suggest the printer can handle varied work without constant manual intervention, while leaving material choice and print settings to the user’s particular project. The review also gave it four and a half stars and an Editor’s Choice award.

Who should consider the price

The $299.99 price makes the Kobra X a candidate for a first printer if multicolor output is part of the appeal, and for a second machine if a workshop needs more capacity for colored models. Its strongest case is the combination of an integrated ACE Gen 2 system, expansion support and the reported speed advantage on a print with hundreds of color changes.

Buyers focused mainly on simple single-color parts may get less value from those features. Those planning multicolor projects should weigh the supported colors and workflow against the kinds of models they expect to print. At the current Amazon price, the Kobra X brings its multicolor setup into a lower price bracket; the time savings in testing make it especially relevant for jobs with repeated filament changes.

Source: Ben Stockton · www.tomshardware.com

Same vesselRelated cargo